Thermal camera│SM080TIPH

Temperature Measurement System

Thermal imaging camera for precise measurement (Image & Temperature)

Temperature Accuracy range ±0.5°C (20°C~25°C ambient temperature)

Genuine Technology Development / Manufacturing

Lens/ Electronic Module/ Housing/ Software

Easy installation and convenient operation 64channels S/W program

Standard tripod mount and general laptop computer are compatible with the Thermal imaging camera

Main Application Areas

Monitoring elevated temperature, Transformers, switchboards, emergency power plants/ vents, warehouses, data center, waste incinerator, underground joint / manhole, cable, and heating & air-conditioning equipments

Thermal imaging camera Specification

FOCAL PLANE ARRAY

Detector Type	a-Si Microbolometer
Array Size	80x80
Pixel Pitch	34㎛
Spectral Band	8~14㎛
Sensitivity(NETD)	<100mk@50Hz, F/1, <300mk

Noise Equivalent Temperature Difference

FEATURES

Avaliable command Protocols	IP, ARP, ICMP, SNMP
Alarm	DC 5V Wet Contact
Color	Color Palette (6color/Black&White)
Temperature Out	All points
Stable Time for Temperature out	<1.5minutes
Target Temp. Range	0℃ to +200℃
System NETD	0.1℃
Radiometric Accuracy	±0.5℃ (30℃ ~ 40℃)

THERMAL IMAGE FORMAT

Detector Frame Rates	30 fps.
Ethernet	10/100 Based-T(RJ-45Connector)
Interface	IP Network
Data Streaming	Real Time Temperature Data
Automatic Gain and Level	AUTO
Display mode	64 channels
Non-Uniformity Correction	2-point Correction
Time to First Image	<2.0 Seconds (After Network Connection)

ENVIRONMENTAL

Operating Temp.	-10℃ to +50℃
Humidity	5 to 95%, non-condensing (optional)
Degree of Protection	IP54

OPTICS

Horizontal FOV	58°
Lens Type	Athermalized
Effective Focal Length	2.71mm
F number	1.4

MECHANICAL

Dimensions(H x W x D)	48x48x66mm (W/O Bracket&Cable)
Weight with lens	200g
Data Cable	CAT5 or Higher(CAT5E.CAT6)

POWER

Input Voltage	DC 5V, 1A
Power Comsumption (nominal)	<2.5W (Max.)